Huayi Carburetor Model Number Location (2024)

When it comes to troubleshooting or seeking information about your engine's Huayi carburetor, identifying the model number is crucial. The model number holds the key to finding the right parts, understanding its specifications, and ensuring proper maintenance. However, locating this number might seem like finding a needle in a haystack at first glance. Fear not; this article aims to guide you through the maze of engines and help you pinpoint the model number of your Huayi carburetor with ease.

Locating the Huayi Carburetor Model Number

1. Begin with the Engine Identification

The first step towards finding the model number of your Huayi carburetor is to locate the engine identification details. Usually, this information is stamped or engraved on the engine itself. Look for a metal plate or a sticker displaying the engine's specifications and details.

2. Check the Carburetor Body

Once you've found the engine identification, it's time to focus on the carburetor itself. The model number is often etched, stamped, or imprinted on the carburetor body. It might be situated on the side, top, or bottom of the carburetor.

3. Inspect Carefully

Sometimes, the model number might not be as prominently displayed as expected. In such cases, use a flashlight or magnifying glass to thoroughly inspect the carburetor. It could be a series of numbers or alphanumeric characters, typically a combination of letters and digits.

4. Refer to the Owner's Manual or Documentation

If you're unable to locate the model number on the carburetor directly, referring to the owner's manual or any accompanying documentation can be immensely helpful. Manufacturers often provide detailed information regarding the carburetor, including its model number, in these documents.

Why is the Model Number Important?

Understanding the significance of the model number is vital. It serves as the gateway to obtaining accurate replacement parts, ensuring compatibility, and acquiring the right information for maintenance and repairs. With the model number at hand, you can swiftly navigate through the myriad of carburetor variations.

Conclusion

In conclusion, identifying the model number of your Huayi carburetor is a pivotal aspect of maintaining and troubleshooting your engine effectively. By following the steps outlined in this guide, you can successfully locate this crucial identifier and unlock a world of precise information and solutions for your carburetor-related concerns.

Frequently Asked Questions (FAQs)

1. Is the model number the same for all Huayi carburetors?

  • No, each carburetor model has its unique identification number based on its specifications and build.

2. Can the model number change over time?

  • Sometimes, newer versions of a carburetor might have a slightly different model number due to modifications or improvements in design.

3. What if the model number is not visible on the carburetor?

  • Check the engine's manual or contact the manufacturer for guidance on alternative locations or methods to identify the model number.

4. Are there online resources to find Huayi carburetor model numbers?

  • Yes, some online databases or forums offer assistance in identifying carburetor model numbers based on engine details or visuals.

5. Can I use a different carburetor model if I can't find the exact match?

  • It's recommended to use the specified model number for optimal performance and compatibility. Using a different model might affect engine performance.

In essence, the model number of your Huayi carburetor acts as a guiding beacon, simplifying the process of maintenance and ensuring the proper functioning of your engine. Identifying it correctly empowers you with the knowledge to make informed decisions regarding your engine's care and maintenance.


1. [PDF] mtd carburetor / rebuild kit identification

  • To correctly identify carburetors used on MTD branded engines to ensure proper rebuild kit part number is selected. Models. Affected: Tech Subject: TECH BRIEF.

2. Huayi Carburetor Identification - Search Shopping - Bing

  • Huayi Carburetor - Unknown Condition / Model / Part Number. $14.95. Huayi ... Huayi Carburetor Model Identification · Huayi Carburetor Parts Diagram · Huayi ...

  • https://cheaper99.com/Huayi Carburetor

3. GENUINE HUAYI CARB REPLACEMENT FOR HUYAI-5X65B

  • Using the wrench set, reconnect the blower fan to the motor shaft securely. Double-check that it is firmly attached to avoid any wobbling or misalignment during ...

  • HUAYI 5X65B CARB ORIGINAL SAME AS 5X65A REPLACES 951-05531, 651-05531. ALSO REPLACES 951-14423 Cub Cadet, Troy-Bilt, MTD, Craftsman, and others USED ON THE FOLLOWING ENGINES: 5X65MU, 6X65MU, 6X65QU 159CC -CUB CADET, TROY-BILT, & CRAFTSMAN ENGINES USED ON MANY MODELS OF CUB CADET, MTD, CRAFTSMAN AND TROY-BILT WALK M

4. Find the right carburetor assembly for a Craftsman snowblower, tiller or ...

  • 27 dec 2018 · Use the supplier and calibration code to find the part number. Supplier, Calibration code, Part number, Sub part number. Huayi, 161H, 951-14019.

  • Use this chart to find the carburetor assembly for a Craftsman snowblower, tiller or log splitter, based on the supplier name and calibration code from the original carburetor.

5. Carburetor Kit - Huayi 951-12788A - OEM Yard Machines

  • Buy the official Yard Machines Carburetor Kit - Huayi 951-12788A replacement - Use our model diagrams, repair help, and video tutorials to help get the job ...

  • Buy the official Yard Machines Carburetor Kit - Huayi 951-12788A replacement - Use our model diagrams, repair help, and video tutorials to help get the job done.

6. MTD Engine Huayi Carburetor and Deni Carburetor Repair Kit ...

  • To correctly identify carburetors used on MTD branded engines to ensure proper rebuild kit part number is selected. 1. Carburetor Calibration Breakdown. -used ...

7. Huayi Carburetor - Walmart

  • Fullas Huayi P18 Carb GX160 Carburetor for HONDA GX160 GX200 GP160 GP200 5.5HP 6.5HP Gasoline Engine Replacement For 16100-ZH8-W61 16100-ZH7-W51 With Choke ...

  • Shop for Huayi Carburetor at Walmart.com. Save money. Live better

8. Huayi Carburetor Compatible - Snapklik.com

  • HUAYI Brand CARBURETOR ASSEMBLY. CARBURETOR ASSEMBLY Compatible with CUB CADET, MTD, TROY-BILT, CRAFTSMAN . THIS CARB FITS MANY SNOWBLOWER MODELS.

  • Shop Snow Blower Replacement Parts by LIZAPUS and more.

9. Carburetor Identification Numbers

  • To identify a carburetor, you can look for the identification number on the carburetor body itself, which is usually located on a metal tag or stamped into the ...

  • Carburetor identification numbers. List of carb number and associated rebuild kits. Buy using the carburetor number.

10. How to Find the Part Number on a Walbro Carburetor

  • 7 nov 2016 · ... numbers may be located on the flange of the carburetor. Once you have determined the specific carburetor model you have, you can go to ...

  • Walbro carburetors are mounted in a variety of different positions on outdoor power equipment and sometimes the part number is not easily identified without disassembling the equipment. Louis Salas, Program Manager for Walbro’s Aftermarket Group, explains how to locate the part number in the video below. The Walbro part numbers and letters can be found […]

11. 2024 Huayi carburetor model number location as Carburetor

  • 17 uur geleden · GENUINE HUAYI 190WB- CARBURETOR ASSEMBLY. FITS 2022 MODELS OF CUB CADET, TROYBILT, AND CRAFTSMAN 420CC SNOWBLOWERS WITH THE 690 …

12. Huayi carburetor diagrams - Powermate 10 in. 43 cc Gas... - Fixya

  • 17 jun 2013 · I need the diagram for a carburetor on a 49cc pit dirt bike please. Question edited for bad spelling or 'carburetor'. No make of model? It ...

  • huayi carburetor diagrams - Powermate 10 in. 43 cc Gas 2-Cycle question

13. 2024 Troy bilt 208cc snow blower carburetor snow online - coltresa.info

  • 6 uur geleden · Model number will begin with 31. Weed Whackers (String Trimmers ... Carburetor for HUAYI 183W Engine. Replaces Part Number 951-05389 ...

14. 2024 Troy bilt storm 2410 carburetor replacement 2620 The - oliyta.info

  • 4 uur geleden · 【Replacement Part Number】:Fit for HUAYI 170SD 170SA ... Carb with Gasket 951-12705 951 …model number 31AH6404766 serial number 1k029b76247.

Huayi Carburetor Model Number Location (2024)

FAQs

How do I know what model my carburetor is? ›

Most carburetors have a unique identification number that can be used to confirm its manufacturer, model number, and specifications such as CFM and factory included jet sizes. The carburetor number is typically located on a metal tag attached to the carburetor.

How do I know what carburetor I need? ›

To arrive at the most appropriate carburetor choice, there's a basic formula: engine displacement multiplied by maximum rpm divided by 3,456. For example: a typical 355ci small-block—a 0.030-over rebuild—with a 6,000-rpm max engine speed would work well with a 616-cfm carb ((355 x 6,000) 3,456 = 616.32).

What model Keihin carburetor do I have? ›

Look at the carburetor itself. You will find a number that is usually preceded by two to three letters. This is your model number. This number is needed for all parts orders or repair assistance.

Is there a universal carburetor? ›

The Daytona CHV Universal adjustable carburetor is available in two models to fit US standard 1bbl manifold bolt patterns.

Are all carburetors universal? ›

No, there are a log of differences between carburetors. Yes, you can see that the choke and throttle levers are different, but what you can not see is that often the throats have different sizes, the tiny holes are in different places, orifices and jets are different, etc.

What are the 2 main kinds of carburetors identified in the carburetor section? ›

Types of Carburetor

There are two main categories of carburetor, fixed venturi and variable venturi.

How do I know what CFM my carburetor is? ›

The formula for calculating how much CFM (cubic feet per minute) an engine requires is: CFM = Cubic Inches x RPM x Volumetric Efficiency ÷ 3456. Any ordinary stock engine will have a volumetric efficiency of about 80%.

What is carburetor size? ›

The correct carburetor CFM size is based on the engine size, the maximum rpm the engine will be used at, and the main purpose of the vehicle, whether street or race use. The formula to calculate CFM size is (engine) cubic inches x (max engine) RPM x volumetric efficiency.

How many different carburetors are there? ›

There are two types of carburetors: Fixed venturi – The velocity of the airflow is used to regulate the flow of the fuel. Variable venturi – The flow of raw fuel is controlled mechanically, and airflow is regulated with fuel flow.

How do I know what size my Keihin carburetor is? ›

How do you tell what size a keihin carb is? Measure the diameter of the engine side of the carb. That is generally the same as the bore size unless the previous owner has done some machining.

What is a Keihin carburetor? ›

Keihin PWK carburetors is the dominant carb on the factory motocross machines. Because of their great performance they come stock on a lot of the leading brand bikes.

How do I identify a Keihin PWK carburetor? ›

Genuine carburetor will have PLAS TECH hoses attached to the carburetor. All Keihin carburetors are manufactured in Japan and NOT in China. A copy of the PWK carburetor will have an unmarked light hose. The serial number will be darker than the genuine carburetor.

Do all carburetors have the same bolt pattern? ›

Carburetors have a variety of bolt patterns (measured by length and width) and it is important to note that you need to allow adequate space for the throttle blades to open and close without binding against the intake manifold's ports.

What are the two types of carburetors? ›

Carburetors are manufactured in several sizes and configurations. There are two types of carburetors: Fixed venturi – The velocity of the airflow is used to regulate the flow of the fuel. Variable venturi – The flow of raw fuel is controlled mechanically, and airflow is regulated with fuel flow.

How to tell the difference between a 2 barrel and 4 barrel carburetor? ›

How can you tell the difference between a 2 and 4 barrel carburetor on an older engine? Whether it's an older engine or a newer one, it's pretty much all the same. Usually by looking at it. A 'two barrel' will only have two openings for the air to enter and a 'four barrel' will have four.

References

Top Articles
Latest Posts
Article information

Author: Manual Maggio

Last Updated:

Views: 6200

Rating: 4.9 / 5 (69 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Manual Maggio

Birthday: 1998-01-20

Address: 359 Kelvin Stream, Lake Eldonview, MT 33517-1242

Phone: +577037762465

Job: Product Hospitality Supervisor

Hobby: Gardening, Web surfing, Video gaming, Amateur radio, Flag Football, Reading, Table tennis

Introduction: My name is Manual Maggio, I am a thankful, tender, adventurous, delightful, fantastic, proud, graceful person who loves writing and wants to share my knowledge and understanding with you.