Crispy Battered Fish and Chips Recipe (2024)

Fish and chips are popular pub fare all around Britain, though I had some of the best in a small seaside town called Hastings, England that my family visited years ago. The crispy golden fried pieces were made using freshly caught fish and were served wrapped in newspaper with thick-cut French fries.

This version of fish and chips is inspired by Dame NYC, an English seafood restaurant in the West Village. Their version of the classic (actually inspired by Heston Blumenthal’s version of fish and chips) has an extra crispy exterior since it’s fried with a combination of all-purpose flour, rice flour, beer and a bit of vodka.

Because both the fish and fries are best fresh and require lots of frying room, I recommend cooking the fries first then reheating them in the broiler or in the air fryer while the fish fries. The batter should be freshly made so it’s frothy and bubbly, I don’t recommend letting it sit ahead of time. It’s also crucial the oil is heated to the proper temperature to get the proper crunch. An infrared thermometer is a great buy to ensure the correct temperature.

Crispy Battered Fish and Chips Recipe

Table of contents

  • Crispy Battered Fish and Chips Recipe
    • Key Ingredients in This Recipe
    • How to Make Fish and Chips
    • Tips and Tricks for This Recipe
    • Other Recipes To Try
Crispy Battered Fish and Chips Recipe (1)

Key Ingredients in This Recipe

  • Fish – A flakey, lean white fish like cod, haddock, halibut or hake has the best texture and flavor for fish and chips. I recommend buying a local fish for the freshest tasting flavor.
  • All purpose flour – This is the most commonly used in beer-batter, using all-purpose flour alone won’t get and stay as crispy as using it in combination with another flour.
  • Rice flour – Which I use in one of my favorite fried recipes, buffalo cauliflower, has a lower moisture content and is also naturally gluten free (however I use it in addition to wheat flour in this recipe).
  • Turmeric – My brother showed me this trick years ago. Adding a bit of turmeric powder adds a beautiful golden color to the batter for perfectly golden looking fried fish in this dish.
  • Vodka – Adding a bit of vodka is the key to a crunchy exterior. Vodka evaporates more quickly than water which makes the crust perfectly crispy.
  • Beer – A simple light beer or lager (it can be cheap) is best for beer batter. You don’t want to use a beer with a flavor that is too overpowering.
  • Potatoes – In this recipe I use Russet potatoes, also known as Idaho potatoes to make the fries served alongside the beer-battered fish. They’re large, starchy, oblong potatoes known for being the ideal baking potato. When cooked they become soft and light on the inside while frying them leaves them extra crispy on the outside.

How to Make Fish and Chips

Crispy Battered Fish and Chips Recipe (2)
Step 1: Prep potatoes.

Slice the peeled potatoes into ½” (1.3cm) thick planks and cut each plank into ½” (1.3cm) fries. Add the cut fries to a large bowl filled with cold water and the vinegar and let sit for 30 minutes.

Step 2: Fry the fries once.

In a heavy-bottomed pot or Dutch oven add enough oil to reach 2” (5cm) up the pan. Heat the oil to 250ºF (130ºC). While the oil heats, drain the fries and pat completely dry. Working in batches, add a handful of the fries to the oil and fry, stirring occasionally, until cooked through, about 5 minutes.

Crispy Battered Fish and Chips Recipe (3)
Crispy Battered Fish and Chips Recipe (4)
Step 3: Increase oil temperature.

Increase the heat. Use tongs to remove the potatoes to a paper towel-lined baking sheet. Repeat with the remaining fries. Let all the fries cool to room temperature then increase the temperature of the oil to 350ºF (180ºC).

Step 4: Fry fries a second time.

Fry for a second time and season. Working in batches again, add fries to the oil and fry until golden brown and crispy, about 3 minutes. Remove to a paper towel-lined baking sheet once more to drain and season with salt.

Crispy Battered Fish and Chips Recipe (5)
Crispy Battered Fish and Chips Recipe (6)
Step 5: Prep the fish.

Cut the fish into filets. Pat dry with paper towels to remove any excess moisture. Season with salt and pepper and set aside.

Step 6: Make beer batter.

Return the oil to heat, adding additional oil to the pan if needed. Heat the oil to 400ºF (200ºC). In a large mixing bowl, whisk together the all-purpose flour, rice flour, baking powder and turmeric. Stir in the vodka followed by the lager into the flour mixture until just combined.

Crispy Battered Fish and Chips Recipe (7)
Crispy Battered Fish and Chips Recipe (8)
Step 7: Coat fish in batter.

Working a few pieces of fish at a time, dip the fish fillets in the batter and turn to coat completely. Remove the fish from the batter one piece at a time, making sure any excess batter drips off.

Step 8: Fry fish.

Add to the hot oil and fry, turning once, until crispy, golden brown and just cooked through, about 3 minutes total. Remove from the oil and let drain on a wire rack set over a paper-towel lined baking sheet. Repeat with the remaining fish.

Crispy Battered Fish and Chips Recipe (9)
Crispy Battered Fish and Chips Recipe (10)
Step 9: Serve.

Divide the fish and fries among serving plates. Serve with a lemon wedges, tartar sauce and malt vinegar.

Tips and Tricks for This Recipe

Swaps and substitutions
  • Try using store bought fries! Rather than making your own fries for the fish and chips, a great shortcut is using store bought, frozen French fries to cut down on the work and frying. Cook them in the oven or use an air fryer for extra crispy fries.
  • Try frying other types of fish using this batter! I actually really enjoy battered, fried salmon.
Troubleshooting Fried Fish
  • My fish isn’t browning. The temperature of the oil you are using to fry the fish isn’t hot enough. Make sure it’s heated thoroughly before adding the fish. Check it by using a thermometer or adding a small amount of batter to the oil, there should be lots of small bubbles. After cooking each batch, give the oil a few minutes to come back to temperature before adding more.
  • My fish isn’t cooked inside but the outside is dark. Your oil is too hot! The batter is browning too fast and the fish doesn’t have enough time to cook while the exterior is browning too fast. The best solution for this is to make sure you have a thermometer on hand.
What to Serve with Fish and Chips
  • Tartar sauce
  • Malt vinegar
  • Lemon wedge
Crispy Battered Fish and Chips Recipe (11)

Other Recipes To Try

If you enjoy this fish and chips recipe, give these recipes a try:

  • Beer Battered Baja Fish Tacos
  • Thai Fried Red Snapper
  • Pan-Seared White Fish

Crispy Battered Fish and Chips Recipe

Crispy Battered Fish and Chips Recipe (12)

PrintPin

Prep Time 30 minutes mins

Cook Time 30 minutes mins

Serves 4

US CustomaryMetric

Ingredients:

For the fries:

  • 4 large Russet potatoes (about 2½ pounds, scrubbed and peeled)
  • ¼ cup white vinegar
  • Vegetable oil, as needed, for frying
  • Kosher salt, as needed

For the battered fish:

  • pound cod or other flakey white fish
  • Kosher salt, as needed
  • Freshly ground black pepper, as needed
  • Vegetable oil, as needed, for frying
  • 1 cup all-purpose flour
  • 1 cup white rice flour
  • 2 teaspoons baking powder
  • ½ teaspoon turmeric
  • ½ cup vodka
  • cup chilled lager beer

For serving:

  • Sliced lemon, for garnish
  • Malt vinegar, as needed
  • Tartar sauce, as needed

Instructions:

For the fries:

  • Slice the peeled potatoes into ½” (1.3cm) thick planks and cut each plank into ½” (1.3cm) fries. Add the cut fries to a large bowl filled with cold water and the vinegar and let sit for 30 minutes.

  • In a heavy-bottomed pot add enough oil to reach 2” (5cm) up the pan. Heat the oil to 250ºF (130ºC). While the oil heats, drain the fries and pat completely dry. Working in batches, add a handful of the fries to the oil and fry, stirring occasionally, until cooked through, about 5 minutes.

  • Increase the heat. Use tongs to remove the potatoes to a paper towel-lined baking sheet. Repeat with the remaining fries. Let all the fries cool to room temperature then increase the temperature of the oil to 350ºF (180ºC).

  • Fry for a second time and season. Working in batches again, add fries to the oil and fry until golden brown and crispy, about 3 minutes. Remove to a paper towel-lined baking sheet once more to drain and season with salt.

For the battered fish:

  • Cut the fish into filets. Pat dry with paper towels to remove any excess moisture. Season with salt and pepper and set aside.

  • Return the oil to heat, adding additional oil to the pan if needed. Heat the oil to 400ºF (200ºC).

  • In a large mixing bowl, whisk together the all-purpose flour, rice flour, baking powder and turmeric. Stir in the vodka followed by the lager until just combined.

  • Working a few pieces of fish at a time, add to the batter and turn to coat completely. Remove the fish from the batter one piece at a time, making sure any excess batter drips off.

  • Add to the hot oil and fry, turning once, until crispy, golden brown and just cooked through, about 3 minutes total. Remove from the oil and let drain on a wire rack set over a paper-towel lined baking sheet. Repeat with the remaining fish.

For serving:

  • Divide the fish and fries among serving plates. Serve with a lemon wedge, tartar sauce and malt vinegar.

DID YOU MAKE THIS?

TAG ME ON INSTAGRAM TO BE FEATURED ON MY STORIES!@cookingwithco*cktailrings

Crispy Battered Fish and Chips Recipe (2024)

FAQs

How do you keep fish batter crispy? ›

Heat oil to 375 degrees F. Or use a deep fryer, and heat to 375 degrees F. Be sure to use a Deep Fry Thermometer, so you know your temperature is correct, as this is key to Crispy Beer Battered Fish. A heavy bottom pot or dutch oven is also best, as it will help maintain oil temperature better.

How do you make batter stick to fish? ›

There are several ways to make batter stick to fish:
  1. Dry the fish thoroughly: Before battering the fish, make sure it is completely dry. ...
  2. Season the fish: Season the fish with salt and pepper before applying the batter. ...
  3. Use a light coating of flour: Coat the fish lightly with flour before dipping it in the batter.
Mar 30, 2016

Why is my battered fish not crispy? ›

My amateur explanation is that you may not have patted dry your fish for its dry coating of whatever you used. Then the oil wasn't hot enough and/or you may have overcrowded the pan. Oil temp drops when food is added to the pan. How do you stop frozen battered fish from being soggy when cooked?

Is batter just flour and water? ›

Many batters are made by combining dry flour with liquids such as water, milk, or eggs. Batters can also be made by soaking grains in water and grinding them wet.

What oil makes fish crispy? ›

Thanks to its neutral flavor, affordable price, and high smoke point, canola oil is the most popular oil for frying fish. Peanut, cottonseed, and coconut oil are also great fish frying oils.

Does baking soda make batter crispy? ›

Is baking soda or powder best for frying? A pinch of baking soda can help produce crispy fried foods. It reacts with the acid in the batter to create carbon dioxide bubbles. These lead to an airy batter and a crisper, fluffier result.

How does Gordon Ramsay make batter for fish? ›

Cooking instructions
  1. In a large bowl, mix both flours, baking powder and sugar.
  2. Add soda water, lager and salt.
  3. Mix together only until the batter binds together and is smooth. ...
  4. Cover your fish with a dusting of plain flour, then drop into the batter and coat completely.
  5. Pre-heat vegetable oil in deep fryer to 180C.

Should I coat fish in flour before batter? ›

I usually dredge the fish in plain flour first and then the beer batter. I actually made beer battered fish tacos for dinner last night and the batter stuck perfectly. It probably also depends on your batter consistency. The recipe I use says the batter should be slightly more liquid than pancake batter.

Why does batter fall off fish when frying? ›

For batter, coat the fish in flour before coating and make sure your batter is thick enough. Usually it's the thickness (or lack thereof) that causes it to fall off during cooking. When breading fish, you should always start by coating it with flour. Then beaten whole eggs, then breadcrumbs.

Does baking powder make batter crispy? ›

But the baking powder is key, because it acts like a salt. It helps draw moisture to the surface, where it can evaporate. Since they have similar reactions, we typically combine baking powder and table salt to amplify this effect, resulting in extra-crispiness.

Should you season fish before battering? ›

Yes - we do - unless we're using the mix to also make hush puppies. Seasoning the fish with salt and pepper simply seals (and sears) it into the fillet. The exact steps we use (and both methods (seasoning the fish and seasoning the batter are covered):

Do you put egg in batter? ›

Batters are made by combining some sort of flour—usually wheat flour, though cornstarch and rice flour are not uncommon—with a liquid and optional leavening or binding ingredients, like eggs and baking powder.

Is batter better with milk or water? ›

Yes, adding milk to your pancake batter can make them softer and fluffier than if you use water. Milk contains fat and protein, which contribute to the texture and structure of the pancakes. The fat in the milk coats the flour particles, making the pancakes more tender and giving them a richer flavor.

What does adding beer to batter do? ›

Beer makes a better base for batter because it simultaneously adds three ingredients—carbon dioxide, foaming agents and alcohol. Each of these ingredients contributes a different aspect of physics and chemistry resulting in a light and crispy crust.

How do you keep batter from getting soggy? ›

Soggy batter prevention that works every time

The key to sog-free batter is surprisingly simple: a light touch when mixing, plus cold water (via What to Cook Today). If you've gotten the dreaded limp fried coating, you might have over-mixed your batter, which forms more pesky gluten that readily soaks up the oil.

Why does my fish batter go soggy? ›

If the wet batter is too thick (in consistency) your cooked batter will be thick (in depth) around the fish and tends to soak up too much oil. Too watery on the other hand and it won't coat the fish properly, and will go soggy quickly. Aim for a batter that runs but fully coats the back of a spoon – see video.

How do you store fried fish so it doesn't get soggy? ›

Do not put any sauces on the fried fish, because this will make the battered fried fish moist and it may turn soggy. Store the battered fried fish in the air tight container and keep it in the fridge. Re-fry the fish, just before you serve it.

How do you keep fried fish crispy for delivery? ›

If you absolutely insist on serving fried fish, the best way to transport it would be in a single layer, in an insulated container, lined underneath with paper towels to absorb some moisture, and with vent holes so that at least some of the steam can escape instead of condensing back on to fish and making the breading ...

References

Top Articles
Latest Posts
Article information

Author: Arline Emard IV

Last Updated:

Views: 6192

Rating: 4.1 / 5 (52 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Arline Emard IV

Birthday: 1996-07-10

Address: 8912 Hintz Shore, West Louie, AZ 69363-0747

Phone: +13454700762376

Job: Administration Technician

Hobby: Paintball, Horseback riding, Cycling, Running, Macrame, Playing musical instruments, Soapmaking

Introduction: My name is Arline Emard IV, I am a cheerful, gorgeous, colorful, joyous, excited, super, inquisitive person who loves writing and wants to share my knowledge and understanding with you.